Mitsubishi stabilisator stang stabilisatorstang

Schokbrekers, Vering, Spacers, Remmen enz (Wielen bij techniek)
Plaats reactie
Gebruikersavatar
R.O.B
Veteraan
Veteraan
Berichten: 9658
Lid geworden op: vr 05 jun 2009, 18:58
14
Model: V50
Type: 2.0
Bouwjaar: 2011
Roepnaam: Rob
Locatie: Veldhoven
Contacteer:

Mitsubishi stabilisator stang stabilisatorstang

Bericht door R.O.B »

http://www.30forty50.com/forum/topic/20 ... arts-help/
looking at the UR part numbers you can get a 23mm swaybar for a Proton which would fit the X40.
If you really wanted a Whiteline bar you would have to use one for a Mirage or FTO.
You can see from the pic the underside of the Proton is almost identical to the x40.
http://www.ultraracing.my/catalog/index ... er=product
Proton Gen 2 Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar

Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Code: UR-AR23-003
Specification: 23mm Solid with Polyurethane Bushing (Standard 12mm Solid)
AfbeeldingAfbeelding

http://www.30forty50.com/forum/topic/19 ... sway-bars/
Any front sway bar from 1-6 will fit the Volvo subframe, I have 25mm Cusco front sway bar on my V40.

The problems are Evo 1 sway bars attach to the lower arms/wishbone with a short droplink, so you would need to fit Evo 1 arms.
Evo 2-3 use the same droplinks as the Ph1 X40 so in theory should fit fine, only thing is I think they use exactly the same size swaybar as the X40 anyway. It is smaller than the Evo 1.
Evo 4-6 as I said will fit the subframe, but like the Evo 1 use a short droplink & attach to the lower arm not the strut.
I did try a droplink from the sway bar to the strut but the angle is too steep & hits in various places.
To use the sway bar you would need to change the lower arms, which require Evo hubs etc.


But in theory I should be able to find a thicker aftermarket evo 2-3 sway bar???
Yes, they should fit fine, I would look at FTO sway bars as well, I'm sure they run bigger front due to the heavy V6 up front.
Gebruikersavatar
JohanH
5th Gear 1000rpm member
5th Gear 1000rpm member
Berichten: 1813
Lid geworden op: zo 06 sep 2009, 14:17
14
Roepnaam: Johan
Locatie: Brabant
Contacteer:

Re: Mitsubishi stabilisator stang stabilisatorstang

Bericht door JohanH »

Klinkt allemaal leuk om een nog dikkere stang te pakken, maar je verschuift de grens dan zover dan op het moment als die gaar glijden dat de grens met omgaan wel heel erg dun is. Vandaar dat ik dat voor een straatauto niet zo snel zou aanraden. En zeker niet in combinatie met een standaard onderstel met eventueel verlagingsveren.

Des al niet te min, leuke vonst!

[ Geplaatst met Android ] Afbeelding
Gebruikersavatar
Ronald Rijnbout
4th Gear member
4th Gear member
Berichten: 443
Lid geworden op: vr 05 jun 2009, 19:15
14
Model: V40
Type: 1.8
Bouwjaar: 1998
Locatie: Breda

Re: Mitsubishi stabilisator stang stabilisatorstang

Bericht door Ronald Rijnbout »

zijn allemaal te koop bij showoffimports in dongen

http://www.showoffimports.nl/search.php?substring=v40

ook veerpootbruggen voor 89euries






ik heb niets met dit bedrijf te maken, alleen laatst iets gekocht
V40 1.8 uit '98. 3.5cm verlaagd Apex en 17 inch AEZ Xylo's met Bridgestone potenza's

http://volvo40forum.nl/forum/viewtopic.php?f=14&t=7
Gebruikersavatar
R.O.B
Veteraan
Veteraan
Berichten: 9658
Lid geworden op: vr 05 jun 2009, 18:58
14
Model: V50
Type: 2.0
Bouwjaar: 2011
Roepnaam: Rob
Locatie: Veldhoven
Contacteer:

Re: Mitsubishi stabilisator stang stabilisatorstang

Bericht door R.O.B »

Even geselecteerd op Mitsubishi en stabilisator stang:
http://www.showoffimports.nl/home.php?cat=509
Plaats reactie