Mitsubishi stabilisator stang stabilisatorstang
Geplaatst: zo 07 jul 2013, 21:51
http://www.30forty50.com/forum/topic/20 ... arts-help/
looking at the UR part numbers you can get a 23mm swaybar for a Proton which would fit the X40.
If you really wanted a Whiteline bar you would have to use one for a Mirage or FTO.
You can see from the pic the underside of the Proton is almost identical to the x40.
http://www.ultraracing.my/catalog/index ... er=product
Proton Gen 2 Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Code: UR-AR23-003
Specification: 23mm Solid with Polyurethane Bushing (Standard 12mm Solid)
http://www.30forty50.com/forum/topic/19 ... sway-bars/
Any front sway bar from 1-6 will fit the Volvo subframe, I have 25mm Cusco front sway bar on my V40.
The problems are Evo 1 sway bars attach to the lower arms/wishbone with a short droplink, so you would need to fit Evo 1 arms.
Evo 2-3 use the same droplinks as the Ph1 X40 so in theory should fit fine, only thing is I think they use exactly the same size swaybar as the X40 anyway. It is smaller than the Evo 1.
Evo 4-6 as I said will fit the subframe, but like the Evo 1 use a short droplink & attach to the lower arm not the strut.
I did try a droplink from the sway bar to the strut but the angle is too steep & hits in various places.
To use the sway bar you would need to change the lower arms, which require Evo hubs etc.
But in theory I should be able to find a thicker aftermarket evo 2-3 sway bar???
Yes, they should fit fine, I would look at FTO sway bars as well, I'm sure they run bigger front due to the heavy V6 up front.
looking at the UR part numbers you can get a 23mm swaybar for a Proton which would fit the X40.
If you really wanted a Whiteline bar you would have to use one for a Mirage or FTO.
You can see from the pic the underside of the Proton is almost identical to the x40.
http://www.ultraracing.my/catalog/index ... er=product
Proton Gen 2 Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Code: UR-AR23-003
Specification: 23mm Solid with Polyurethane Bushing (Standard 12mm Solid)
http://www.30forty50.com/forum/topic/19 ... sway-bars/
Any front sway bar from 1-6 will fit the Volvo subframe, I have 25mm Cusco front sway bar on my V40.
The problems are Evo 1 sway bars attach to the lower arms/wishbone with a short droplink, so you would need to fit Evo 1 arms.
Evo 2-3 use the same droplinks as the Ph1 X40 so in theory should fit fine, only thing is I think they use exactly the same size swaybar as the X40 anyway. It is smaller than the Evo 1.
Evo 4-6 as I said will fit the subframe, but like the Evo 1 use a short droplink & attach to the lower arm not the strut.
I did try a droplink from the sway bar to the strut but the angle is too steep & hits in various places.
To use the sway bar you would need to change the lower arms, which require Evo hubs etc.
But in theory I should be able to find a thicker aftermarket evo 2-3 sway bar???
Yes, they should fit fine, I would look at FTO sway bars as well, I'm sure they run bigger front due to the heavy V6 up front.